Calibre 01 Perpetual, an edition of eighty-eight

The second, made by hand.

A hand-wound watch of 247 parts, each one finished, assembled and regulated by a single watchmaker above Le Sentier, in the Vallée de Joux.

Showing your time, . The seconds hand beats eight times a second.

I

Turn it over.

Behind the sapphire caseback the Calibre H-01 beats at 28,800 vibrations an hour. The balance swings four times a second, and the pallet fork lets the escape wheel advance half a tooth at a time.

II

Wind it.

Forty turns of the crown coil the mainspring tight inside its open barrel. Fully wound, it keeps seventy-two hours: three days off the wrist before the balance comes to rest.

III

Open it.

Two hundred and forty-seven components and thirty-one jewels. Every one is bevelled, grained or polished by hand, including the parts no owner will ever see.

IV

Close it.

Re-cased, then regulated in five positions and observed for twenty-one days before it leaves the atelier, keeping within minus two and plus four seconds a day.

The Calibre 01 Perpetual in red gold with a midnight guilloché dial, worn beneath a white shirt cuff

Then it is yours.

Thirty-nine and a half millimetres across and 10.4 thin, cut to slip beneath a shirt cuff. Wound each morning with forty turns of the crown, a small ritual that takes less than a minute.

A watchmaker's bench by a frosted window in the Vallée de Joux at blue hour

The maison

Eleven watchmakers, one calibre.

Aurèle Vautier left a career restoring museum clocks in 2009 and took the lease on a farmhouse above Le Sentier, where winter lasts long enough to finish a balance cock properly. Fifteen years on, the maison is eleven people, a 1920s rose engine and a single calibre we keep refining rather than replacing.

Each watch is assembled start to finish by one watchmaker, whose initials are engraved beneath the balance cock, where only the next person to service it will find them.

Founded
2009
Watchmakers at the bench
11
Watches a year, at most
280
Hours to finish one movement
310

The craft

The hours no one sees.

Most of the time in a Horologe goes into surfaces hidden behind the dial or under a bridge. We finish them anyway, because the watchmaker knows they are there.

A burin engraving scrolling foliage into a balance cock under a loupe

01

Hand-engraving

Each balance cock is engraved freehand with a burin under a ten-times loupe. Forty hours of work, and no two patterns are alike.

Perlage being grained onto a mainplate with a pegwood stick, rubies set in the plate

02

Perlage

Two thousand four hundred overlapping circles, grained one at a time with a turning pegwood stick, so the mainplate catches the light even where it is hidden.

A silver dial blank being cut on a hand-cranked rose engine

03

Guilloché

Our dials are cut on a 1920s rose engine turned by hand. A dial takes a day; a slip of a hundredth of a millimetre and it goes back to the melt.

A gold balance wheel and blued hairspring in motion

04

Regulation

Twenty-one days on the timing bench in five positions. Only then is the caseback closed and the number engraved.

The editions

Three metals, three dials.

Movement
Calibre H-01, hand-wound
Frequency
28,800 vph (4 Hz)
Power reserve
72 hours
Jewels
31
Case
18k white gold, 39.5 × 10.4 mm
Dial
Midnight blue, hand-cut guilloché
Strap
Navy alligator, hand-stitched
Price
On application

The numbering

Numbered by hand.

Nuit pieces placed with collectors so far: 47. The next to be engraved on its caseback is No. 048, and it is still unassigned.

We never produce more than an edition promises, and we do not hold a waiting list. When a number is gone, it is gone.

By appointment

Sit with the watch.

Viewings are private and unhurried: at the atelier in Le Sentier, in our Geneva salon, or by video with the watchmaker at the bench. Élise Vautier replies to every request personally, usually within a day.

Please tell us your name.

An email address we can reply to, please.

Where
Edition

Choose a date from tomorrow onwards.